1.Mainboard Backlash Compensation Synchronization Issue:

1.1 If mainboard compensation is not enabled, the mainboard will not synchronize automatically.

1.2 When enabling mainboard compensation, a prompt will ask whether to synchronize the mainboard backlash. If compensation parameters are modified but not written, the modified parameters will be automatically synchronized to the mainboard.

2.Path Optimization:

Added a “layer priority” option.

3.Manual Sorting:

Significantly improves the efficiency of manually selecting machining paths.

4.Open Support for UVC Camera Mark Point Functionality.

中国·1382cm太阳玩游戏(股份有限公司)-Official website

Single Beam Large Vision Spray Cutting Integrated Control System

Application